Your product finder for industrial & commercial HVAC equipment
ENERGY: Sustainability; Optimisation & Environment
- All CPDs in the section
- Biomass & Bio Fuel
- Combined Heat & Power
- Controls
- Energy Efficiency
- Energy Optimisation
- Battery Technology
- Mixed mode ventilation
- Heat Pumps
- Heat Reclaim & Recovery
- Controls
- Metering
- Heat Exchangers
- Natural Ventilation
- Natural Light
- Climate Change
- Natural Ventilation & Lighting
Air Conditioning & Refrigeration
- All CPDs in the section
- Air Quality & Filtration
- Air Conditioning Systems & Ancilliary Equipment
- Chilled Water Systems
- Comfort Cooling
- Floor-void Plenum Systems
- Variable Refrigerant Flow
- Air Handling Units
- Chillers
- Evaporative Cooling
- Heat Pumps
- Humidification
- Refrigeration Equipment
- Variable Refrigerant Flow
- Mission-critical / Computer Room Systems
- Air/Water Systems
- Close Control System
- Air Conditioning Control Systems
- Pressure Stabilisation
- Fan Coil Units
- Plantroom
Air Distribution & Ventilation
Controls & Instrumentation
Heating
- All CPDs in the section
- Boilers & Water Heaters
- CHP – Combined Heat & Power
- Electric Heating
- Heat Pumps
- Water Treatment & Recirculating Water Management
- Air Curtains
- Radiant Heating
- Warm Air Heating
- Chimneys
- Heat Exchangers/ Calorifiers
- Other
- Other, heat emitters
- Radiators
- Heat Interface Units
- Heat Networks, District Heating & Communal Heating
- Insulation
- Thermal Insulation Materials
- Overheating
-
General Combustion and Flue Design for Boilers
(A1 FLUE SYSTEMS) -
Clean Air Act and Biomass
(A1 FLUE SYSTEMS) -
Generator Exhausts – Design and sizing
(A1 FLUE SYSTEMS) -
Domestic Hot Water (DHW) Sizing Principles & Tank-in-Tank technology explained
(ACV UK LTD) -
Drivers for change and understanding the BESA HIU test regime
(ALTECNIC) -
Understanding Sealed Systems
(ALTECNIC) -
Understanding heat interface units
(ALTECNIC) -
Hot water Generation for Commercial & Industrial Applications
(ANDREWS WATER HEATERS - Baxi Heating) -
A Guide to Pressurisation Units
(AQUATECH PRESSMAIN LTD) -
A Guide to water booster sets - CIBSE
(AQUATECH PRESSMAIN LTD) -
Introduction to Mechanical Ventilation & Heat Recovery (MVHR)
(BARKELL AIR HANDLING UNITS (Part of Airedale International)) -
Heat Networks
(BAXI HEATING) -
Air Curtain Technology
(BIDDLE AIR SYSTEMS) -
Limescale control through the use of Physical Conditioners & Water Softeners
(BWT UK LIMITED) -
Basic Water Chemistry & Disinfection
(CULLIGAN (UK) LTD) -
Basic Limescale Control
(CULLIGAN (UK) LTD) -
Basic Filtration including Reverse Osmosis
(CULLIGAN (UK) LTD) -
Next Generation Heat Networks – Key Considerations
(EVINOX ENERGY LTD) -
Understanding the BESA Test Standard for Heat Interface Units – VWARTS and All
(EVINOX ENERGY LTD) -
Sealed System Equipment- Expansion Vessels
(FLAMCO LTD) -
Flamco Balancing Solutions
(FLAMCO LTD) -
Applying Diversity in Residential Heat Networks
(FLAMCO LTD) -
Pressurisation equipment
(FLAMCO LTD) -
An Introduction to R32
(FUJITSU GENERAL AIR CONDITIONING (UK) LTD) -
VRF Application & Design
(FUJITSU GENERAL AIR CONDITIONING (UK) LTD) -
A Major Step Forward in Steam Boiler Development
(FULTON LTD) -
Effective use of corrosion-resistant press-fit carbon steel piping systems
(GEBERIT SALES LTD) -
How Heat Pumps can help your project to pass Planning and Building Regulations
(Glen Dimplex Heating & Ventilation) -
Low Temperature Networks
(Glen Dimplex Heating & Ventilation) -
Finding the path to part L Compliance with Electric Heating
(Glen Dimplex Heating & Ventilation) -
Introducing the Heatrae Sadia Unvented Hot Water Systems CPD
(HEATRAE SADIA - Baxi Heating) -
Best Practice Heating & Hot Water Plant Refurbishment
(Hamworthy Heating) -
Best Practice in Domestic Hot Water
(Hamworthy Heating) -
New boilers on old heating systems: hydraulic design – a story of separation
(Hamworthy Heating) -
Energy Saving in Commercial Heating and Hot Water
(Hamworthy Heating) -
Specification and Optimisation of Thermal Insulation for Building Services
(ISOVER UK) -
Good Flue design and Current Design Standards
(JEREMIAS UK) -
Design and Application of Air Curtain Systems
(JS AIR CURTAINS) -
Limiting the effects of overheating in building services applications
(KINGSPAN TECHNICAL INSULATION) -
Time for change - helping a new generation of engineers get it Time for change - helping a new generation of engineers get it right first time
(KINGSPAN TECHNICAL INSULATION) -
Rethinking Ductwork
(KINGSPAN TECHNICAL INSULATION) -
Pip Insulation Solutions for Building Services / HVAC Applications
(KINGSPAN TECHNICAL INSULATION ) -
AN INTRODUCTION TO HOT WATER CYLINDERS
(KINGSPAN WATER & ENERGY CYLINDERS) -
Various Methods of Water Treatment including Physical Water Treatment
(LIFESCIENCE PRODUCTS LTD) -
CPD Seminars designed to give you the skills and knowledge you need to make a success of heat networks
(LOGSTOR UK LTD) -
Radiant Panel Heating: Applications & Product Types
(MERRIOTT) -
Engineering Sustainable DHWS in Modern Building Design
(NVENT RAYCHEM) -
Domestic & Commercial Hot Water Systems
(OSO HOTWATER (UK) LTD) -
Dynamic Hydronic Balancing Solutions.
(PEGLER) -
Fabric Diffusers and Air Distribution
(Prihoda UK Ltd) -
Fabric Ducting (overview)
(Prihoda UK Ltd) -
Deaeration & Degassing Explained
(REFLEX) -
Introducing the Remeha CHP CPD
(REMEHA - Baxi Heating) -
CHP Commerical Buildings - Maximising CHP Efficiency and Savings CPD
(REMEHA - Baxi Heating) -
Bespoke Prefabricated Heating Solutions CPD
(REMEHA - Baxi Heating) -
A Guide to HVAC Standards & Applications
(ROCKWOOL) -
4G – Lean Heat Networks Design Seminar
(SAV SYSTEMS UK LTD) -
HVAC Ultrasonic Commissioning Modules
(SAV SYSTEMS UK LTD) -
FlatStation – Heat Interface Units
(SAV SYSTEMS UK LTD) -
AirMaster – Demand Controlled Ventilation
(SAV SYSTEMS UK LTD) -
Heat Network Metering (Smart M-Bus)
(SAV SYSTEMS UK LTD) -
LoadTracker – CHP
(SAV SYSTEMS UK LTD) -
Evolution of the central heating radiator with a focus on safety radiators
(STELRAD RADIATORS) -
The difference in tubular radiators, specifications & dimensions which impact the heat available.
(STELRAD RADIATORS) -
Heating Rooms with Tubular Radiators & Understanding the Eco-Friendly Processes
(STELRAD RADIATORS) -
Plate Heat Exchangers
(STOKVIS HEAT EXCHANGERS) -
Heat Exchanger Theory and Practice
(SWEP INTERNATIONAL AB) -
Introduction to Radiant Heating Panels
(Solray) -
Low carbon; space saving hot water solutions
(Stiebel-Eltron UK Ltd,) -
CLOSED SYSTEM WATER QUALITY
(VEXO INTERNATIONAL (UK) LTD) -
Combined Heat and Power
(Viessmann ) -
District Heating Schemes
(Viessmann ) -
High and low water content boilers
(Viessmann )
General Combustion and Flue Design for Boilers
For further information contact:
Length
1 Hour
Attendees
All Levels of Engineers
Fee
Free
Location
Customer Offices
Provider
A1 FLUE SYSTEMS
Description
General Combustion and Flue Design For Boilers – How a flue works, design considerations for various appliances, current regulations, ventilation. CE Marking applied to metal flue products. Types of flue available for various applications.
Course title and key points covered
General Combustion and Flue Design For Boilers
1. How a flue works
2. Design considerations for various types of appliance
3. Current legislation
4. Selection of suitable flue solutions
5. Boiler room ventilation
Speakers
David Horn
John Hamnett
Phil Beal
Pipework/ Valves/ Pumps, etc.
Building Management / Legislation / Regulation
System Design & Project Management
Electrical Services
- No CPDs